Nationally Recognized and Trusted. Contact Us Today!

READ THOROUGHLY BEFORE APPLYING!

Contents:
1 (12.5 oz.) can BRAKE Cleaner Spray, (4 oz.) can Brake Caliper Paint, 1 (1/2 oz.) jar Reactor, 1 stir stick, 1 application brush, 1 color decal.
Suggested additional materials: masking tape, small wire brush, clean cotton cloth.


CAUTION:
Product use is at own risk. G2 is not liable for any damage or injuries resulting from use or misuse of this product or failure to comply with these instructions.  BRAKE Caliper Paint System cannot be used for braking surfaces (e.g.) discs, pads or shoes. Should the paint contact any of these parts, they must be cleaned or replaced immediately.  Only open cans immediately before use. Apply and use product only in dust-free, well-ventilated area. Ideal working temperature between 56 - 70 degrees.  Working time is 2-4 hours depending on ambient temperature. Plan the application process accordingly. Also, brake dust may contain asbestos. Wear safety clothing and a face mask while cleaning calipers.

Directions

Preparation
  • Remove all four wheels from the vehicle. This product was developed for easy DIY application so removal of calipers and/or drums will not be necessary; however, if you intend to paint inside the calipers, the brake pads may have to be removed before continuing.
  • Clean surfaces to be painted with the enclosed G2 Brake Cleaner Spray. Do not use degreasers or other solvents!  Spray should be applied liberally and allowed to air dry. Please read and follow specific instructions and cautions on can. Use a steel brush to loosen any rust and wipe away with a clean, lint free cloth.
  • Masking of the area to be painted is recommended. Cover all rubber parts and the brake bleeder screw.
Application -
  • Pour the entire jar of Reactor into the Caliper Paint and mix it thoroughly with the enclosed stir stick. Leave the mixture to react for about 5 minutes and mix once more before applying.
  • Apply the reacted paint to the caliper or drum with the enclosed brush in a thin, even coat. A few bubbles will naturally appear in the first coat as a side effect of the reaction process.
  • Wait 15 minutes before applying a second coat to cover any bubbles and even out the gloss finish of each caliper.
Curing -
  • The paint requires 2 hours curing time before reinstalling wheels.  Do not use vehicle for 24 hours to allow paint to fully harden.
 
        
 

 


CARE AND WARRANTY:
Periodically clean brake calipers to maintain the high-gloss finish by spraying with a hose or wiping off with a damp cloth.  G2 has complete faith in its specially formulated paint and offers 100% Product Performance Guarantee.  If at any time during the life of your car the paint should flake or chip off, simply provide proof of purchase and proof of failure to G2 and we will replace the kit at no cost.

 

VIDEOS

BACK TO TOP
pin_drop